Black Standard In Wall Skimmer
Code: 81
£26.99
Black in wall pond debris surface skimmer

The in wall standard mouth skimmer is a must in any new pond allowing effective removal of surface debris from your pond.

Simply build in to the wall of your pond at the correct level, as the water level rise and fall the in built weir flap will adjust to the optium skimming point.There is a removable basket to collect pond debris.Suitable for both liner and concrete pond finishes

You will require a bsp male fitting to suit your pipe and a suitable pump. They can also be modified to gravity feed by fitting a 3in tank connector in to the bottom [not supplied].

Please see our skimmer fish guards to protect your fish

Max dimensions across face 185 mm, high 180 mm (aperture which faces the pool)
overall height from bottom of 1.5 bsp female outlet to top 350 mm
Back of body to face plate 238 mm
Front edge of body to face plate 58 mm( width of brickwork it will clear max)
width diameter of body 195 mm
1.5" bsp female thread bottom outlet
It is possible to enlarge the bottom of this skimmer to convert to gravity feed,it is normally
possible to fit a 82 mm/3" tank liner connector in to the bottom some cutting is required to do this,
or a 6" to 4" rubber reducer, all available from us at extra cost

The in wall standard mouth skimmer is a must in any new pond allowing effective removal of surface debris from your pond.

Simply build in to the wall of your pond at the correct level, as the water level rise and fall the in built weir flap will adjust to the optium skimming point.There is a removable basket to collect pond debris.Suitable for both liner and concrete pond finishes

You will require a bsp male fitting to suit your pipe and a suitable pump. They can also be modified to gravity feed by fitting a 3in tank connector in to the bottom [not supplied].

Please see our skimmer fish guards to protect your fish

Max dimensions across face 185 mm, high 180 mm (aperture which faces the pool)
overall height from bottom of 1.5 bsp female outlet to top 350 mm
Back of body to face plate 238 mm
Front edge of body to face plate 58 mm( width of brickwork it will clear max)
width diameter of body 195 mm
1.5" bsp female thread bottom outlet
It is possible to enlarge the bottom of this skimmer to convert to gravity feed,it is normally
possible to fit a 82 mm/3" tank liner connector in to the bottom some cutting is required to do this,
or a 6" to 4" rubber reducer, all available from us at extra cost
Customer Reviews (0)