We recommend around 1 kilowatt to every 1000 gallons or 4500 litres depending on set temperature.

The new Cloverleaf Pond heater is very compact,so can fit in a very small space.

Supplied with quick release demountable couplings on each side, which will fit hose sizes 3/4" 20 mm, 1" 25 mm 1.25" 32 mm and 1.5" 38 mm.

Can also be used with 1.5" solvent waste 43 mm and also 50 mm metric pressure pipes all above fittings included.

Please note an upstand of pipework must be created at each end of the heater to create a reservoir within the heater to prevent overheating if the pump fails or a power cut,this is necessary with all in line heaters.

In built rotary thermostat with temperature range from 0 to 40 degrees.

supplied with 1.5 metres of mains cable.

For use out of water only.