Our Inner Repair Hose Tail can be glued in to 43 mm solvent waste pipe, this means it can be used on cut or broken fittings, such as uvs or tank connectors.

If there is a piece of 43 mm 1.5" solvent waste pipe above 25 mm deep you can connect hose to it with this Inner hose tail.

Can fit hose sizes 1/2"/ 13 mm, 3/4" /19 mm, 1"/25 mm, 1.25"/32 mm and 1.5"/38 mm.

Before fitting simply cut off the smaller sizes so as not to slow down the flow of water.

Please note not suitable for new UV's or fittings .Please see our other solvent hose tails